China High Quality Knife Gate Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve
China High Quality Knife Gate Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve Detail:
ANSI＆DIN Knife Gate Valve
Applicable Standards
Knife Gate Valve, MSS SP-81
Steel Valves, ASME B16.34
Face to face MSS SP-81
End Flanges EN 1092-1/ASME B16.5/ASMEB16.47
Inspection and test MSS SP-81
Material: cast steel, stainless steel, special alloy, CI, DI etc
Size Range: DN50~DN1000
Pressure Rating: ASME CL, 150, PN10,PN16
Temperature Range: 0℃~120℃
MATERIALS:
Casting: (GGG40, GGG50, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy,UB6
Design Features:
Knife Gate Valve which makes it one of the best abrasive resistant materials. Our Knife Gate Valve is full lined with high quality urethane, which far exceeds the wear-life of gum rubber and any other softer liner, or sleeve materials.
1.Zero leakage. Full lined urethane valve body and molded elastomer gate seal prevents leakage permanently both the valve sealing and the valve body itself during working.
2.Extended wear-life. High quality abrasive resistant urethane liners, and robust stainless knife gates as well as the unique design of the valve itself provide an extremely long service life.
3.Bi-directional shut-off. When back flow happens NSW can be used as a preventer as well.
4.Self-flushing design. During valve closing the beveled knife gate redirects flowing slurry towards the beveled urethane liner seat, develops turbulence and intensifies the flow then flushes the slurry out of the bottom of the urethane as the gate settles into the seat.
5.Convenient rebuilds. When finally rebuilds are necessary, the wear-parts (urethanes, gate seals, knife gates) can all be replaced in field. Valve bodies and other parts are reusable.
Options
1.Liners. Varieties of urethanes are available.
2.Gates. SS304 gates with hard chromium coated are standard. Other alloys are available (SS316, 410, 416, 17-4PH…) Optional gate coatings are also available.
3.PN10, PN16, PN25, 150LB, are available.
4.Optional actuators are available.
Product detail pictures:
Related Product Guide:
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for China High Quality Knife Gate Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve , The product will supply to all over the world, such as: Greek, St. Petersburg, Malawi, We supply skilled service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound items with good logistics service and economical cost. Depending on this, our products and solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ??customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
By Jean Ascher from Finland - 2018.10.01 14:14
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Fiona from Angola - 2018.09.29 13:24
Related products
-
China High Quality Pneumatic Knife Gate Valve F...
The opening and closing component of the knife gate valve is a door, and the direction of fluid movement perpendicular to the direction of the door, the knife gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. Mainly used in the field of paper, slurry, mining, ect. CNGW also supply the gate valves as below Pneumatic Knife Gate Valve Manual Slurry Valve Sprocket Knife Gate Valve Electric Knife Gate Valve Dark Rod Pneumatic Knife Gate Valve Conceal...
-
ODM Api Globe Valve Factories – BS1873...
Applicable Standards Globe valve, BS1873, API 623 Steel valve, ASME B16.34 Face to face ASME B16.10 End Flanges ASME B16.5/ASME B16.47 Butt welding ends ASME B16.25 Inspection and test API 598 Material: WCB, WCC, LCB, LCC, LC1, LC2, LC3, CF8, CF3, CF8M, CF3M, CF8C, CN7M, CA15, C5, WC6, WC9, C12,C12A,C95800,C95400,Monel,4A,5A,6A etc. Size Range: 2’’~24’’ Pressure Rating: ASME CL, 150,300,600,900,1500,2500 Temperature Range: -196°C~600°C Design Description - Outside Screw and Yoke - Bolted Bonn...
-
ODM Heavy Hammer Check Valve Manufacturer ̵...
API 594 Lugged Wafer Check Valve Product Range Sizes: NPS 1/2 to NPS 24 (DN15 to DN600) Pressure Range: Class 800, Class 150 to Class 2500 End connection: Lugged, Wafer Lugged Lugged Wafer Check Valve-Specifications Design Standard: API 594 , API 6D Face to face standard: ANSI,API 594 ,API 6D ,ANSI B 16.10 End Connection: Wafer, Lug, Solid Lug, double Flanged Size Range: 2’’~48’’(DN50~DN1200) Pressure Rating of Valve:150LB 300LB 600LB 900LB Body & Disc Material:ASTM A 126 GR. B (Cast Iron...
-
1000 Psi Ball Valve Products – API 602 ...
Product Range Sizes: NPS 2 to NPS 48 Pressure Range: Class 150 to Class 2500 Flange Connection: SW, BW, RF, FF, RTJ Materials Forged (A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5,) Standard Design & manufacture API 602, API 6D, API 608, ISO 17292 Face-to-face ASME B16.10 End Connection ASME B16.5 Test & inspection API 598 Fire safe design API 6FA, API 607 Also available per NACE MR-0175, NACE MR-0103, ISO 15848 Other PMI, UT, RT, PT, MT Design Fe...
-
OEM Best By Pass Gate Valve Products – ...
Size Range and Pressure Class Size from 1/2” to 4” (DN15-DN100) Pressure from 150LBS to 1500LBS (PN16-PN240) Design Standards Design / Manufacture as per the standards API 6D; ASME B16.34; DIN 3357; EN 13709; GB/T12237; BS5351 Face to Face Length (Dimension) as per the standards ASME B16.10; EN 558-1 Gr. 14 (DIN 3202-F4); DIN 3202-F5; DIN 3202-F7; BS5163 Flanged Dimension according to the standards ASME B16.5; EN 1092-1; BS4504; DIN2501; Flanged to ASME B16.5 (2” ~ 24”) and ASME B16.47 Series...
-
OEM Best 800lb Forged Floating Ball Valve Facto...
Product Range Sizes: NPS 2 to NPS 48 Pressure Range: Class 150 to Class 2500 Flange Connection: SW, BW, RF, FF, RTJ Materials Forged (A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5,) Standard Design & manufacture API 602, API 6D, API 608, ISO 17292 Face-to-face ASME B16.10 End Connection ASME B16.5 Test & inspection API 598 Fire safe design API 6FA, API 607 Also available per NACE MR-0175, NACE MR-0103, ISO 15848 Other PMI, UT, RT, PT, MT Design Fe...