Din Plug Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve
Din Plug Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve Detail:
ANSI＆DIN Knife Gate Valve
Applicable Standards
Knife Gate Valve, MSS SP-81
Steel Valves, ASME B16.34
Face to face MSS SP-81
End Flanges EN 1092-1/ASME B16.5/ASMEB16.47
Inspection and test MSS SP-81
Material: cast steel, stainless steel, special alloy, CI, DI etc
Size Range: DN50~DN1000
Pressure Rating: ASME CL, 150, PN10,PN16
Temperature Range: 0℃~120℃
MATERIALS:
Casting: (GGG40, GGG50, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy,UB6
Design Features:
Knife Gate Valve which makes it one of the best abrasive resistant materials. Our Knife Gate Valve is full lined with high quality urethane, which far exceeds the wear-life of gum rubber and any other softer liner, or sleeve materials.
1.Zero leakage. Full lined urethane valve body and molded elastomer gate seal prevents leakage permanently both the valve sealing and the valve body itself during working.
2.Extended wear-life. High quality abrasive resistant urethane liners, and robust stainless knife gates as well as the unique design of the valve itself provide an extremely long service life.
3.Bi-directional shut-off. When back flow happens NSW can be used as a preventer as well.
4.Self-flushing design. During valve closing the beveled knife gate redirects flowing slurry towards the beveled urethane liner seat, develops turbulence and intensifies the flow then flushes the slurry out of the bottom of the urethane as the gate settles into the seat.
5.Convenient rebuilds. When finally rebuilds are necessary, the wear-parts (urethanes, gate seals, knife gates) can all be replaced in field. Valve bodies and other parts are reusable.
Options
1.Liners. Varieties of urethanes are available.
2.Gates. SS304 gates with hard chromium coated are standard. Other alloys are available (SS316, 410, 416, 17-4PH…) Optional gate coatings are also available.
3.PN10, PN16, PN25, 150LB, are available.
4.Optional actuators are available.
Product detail pictures:
Related Product Guide:
Sticking for the perception of "Creating goods of high quality and making good friends with people today from all around the world", we constantly set the interest of shoppers to begin with for Din Plug Valve Factories – ANSI＆DIN Knife Gate Valve – Guangwo Valve , The product will supply to all over the world, such as: Iraq, Zimbabwe, Oslo, Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Julie from Tunisia - 2018.03.03 13:09
The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
By Barbara from Sudan - 2017.09.29 11:19
Related products
-
China High Quality Triple Offset Butterfly Valv...
Product Range Sizes: NPS 2 to NPS 48 Pressure Range: Class 150 to Class 2500 Temperature :-20℃ ~200℃ (-4℉~392℉) Materials Casting (Cast Iron, Ductile Iron, A216 WCB, WC6, WC9, A350 LCB, A351 CF8, CF8M, CF3, CF3M, A995 4A, A995 5A, A995 6A), Alloy 20, Monel, Inconel, Hastelloy Standard Design & manufacture API 609, AWWA C504, ASME B16.34 Face-to-face API 609, ASME B16.10 End Connection Flange Ends to ASME B16.5, ASME B16.47, MSS SP-44 (NPS 22 Only) - AWWA A207 - Butt Weld Ends...
-
2500lb Ball Valve Factory – 2 Piece Fla...
Product Range Sizes: DN15-DN200（1/2” -8”） Pressure Range: DIN PN16-40 / ANSI 150Lb 300Lb / JIS 10K Temperature :-20℃ ~200℃ (-4℉~392℉) Threaded Selection: BSPP / BSPT / NPT / DIN 2999 – 259 / ISO 228 – 1. Materials WCB、304/CF8, 316/CF8M, 304L/CF3, 304L/CF3M, Duplex Stainless Steel Standard Design & manufacture ANSI B16.34；BS5351;DIN3337 Face-to-face ANSI B16.10;DIN3202 F1,F4/F5;GB/T 12221;JIS B2002 End Connection ANSI B16.5;DIN 2632/2633&DIN 2634/2635;JB/T 79;JIS...
-
ODM Bronze Gate Valve Manufacturer – Hi...
Single Action Pneumatic Knife Gate Valve With Limit Switch, Filter, Solenoid Valve 2 knife gate valve body Lug inox CF8M dn 6′’ ASA 150 + Actuator single action with limit switch,Filter,solenoid valve Applicable Standards Knife Gate Valve, MSS SP-81 Steel Valves, ASME B16.34 Face to face MSS SP-81 End Flanges EN 1092-1/ASME B16.5/ASMEB16.47 Inspection and test MSS SP-81 Material: CF8M Size Range: DN50~DN1000 Pressure Rating: ASME CL, 150, PN10,PN16 Temperature Range: 0℃~120℃ Design Des...
-
Forged Steel Valve Supplier – API609 Ru...
Product Range Sizes: NPS 2 to NPS 48 Pressure Range: Class 150 to Class 2500 Temperature :-20℃ ~200℃ (-4℉~392℉) Materials Casting (Cast Iron, Ductile Iron, A216 WCB, WC6, WC9, A350 LCB, A351 CF8, CF8M, CF3, CF3M, A995 4A, A995 5A, A995 6A), Alloy 20, Monel, Inconel, Hastelloy Standard Design & manufacture API 609, AWWA C504, ASME B16.34 Face-to-face API 609, ASME B16.10 End Connection Flange Ends to ASME B16.5, ASME B16.47, MSS SP-44 (NPS 22 Only) - AWWA A207 - Butt Weld Ends...
-
OEM Best 900lb Globe Valve Products – -...
Applicable Standards Globe valve, BS1873 Steel valve, ASME B16.34 Face to face ASME B16.10 End Flanges ASME B16.5/ASME B16.47 Butt welding ends ASME B16.25 Inspection and test API 598S Material: SS Size Range: 2’’~24’’ Pressure Rating: ASME CL, 150,300,600,900,1500,2500 Temperature Range: -196°C~600°C Design Description - Outside Screw and Yoke - Bolted Bonnet and Pressure Seal - Rising stem and non-rising stem - Available with gear operator - Flange Ends and Buttwelding Ends - Different type...
-
China High Quality 1500lb Gate Valve Exporters ...
1.4408 DIN Gate Valve PN16 Applicable Standards Design EN 1984 Face to face EN 558-1 End Flanges EN 1092-1 Butt Welding ends EN 12627 Inspection and test EN 12266-1 Material: 1.4408 Size Range: DN32~DN1200 Pressure Rating: PN10~PN160 Temperature Range: -196°C~650°C Design Description - Outside Screw and York - Bolted Bonnet and Pressure Seal - Flexible wedge, fully guided - Seat in stellite or 13%Cr - Rising stem and non-rising stem - Available with gear operator - Flange Ends - Butt-weldin...