ODM Dual Plate Wafer Check Valve Supplier – ANSI＆DIN Knife Gate Valve – Guangwo Valve
ODM Dual Plate Wafer Check Valve Supplier – ANSI＆DIN Knife Gate Valve – Guangwo Valve Detail:
ANSI＆DIN Knife Gate Valve
Applicable Standards
Knife Gate Valve, MSS SP-81
Steel Valves, ASME B16.34
Face to face MSS SP-81
End Flanges EN 1092-1/ASME B16.5/ASMEB16.47
Inspection and test MSS SP-81
Material: cast steel, stainless steel, special alloy, CI, DI etc
Size Range: DN50~DN1000
Pressure Rating: ASME CL, 150, PN10,PN16
Temperature Range: 0℃~120℃
MATERIALS:
Casting: (GGG40, GGG50, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy,UB6
Design Features:
Knife Gate Valve which makes it one of the best abrasive resistant materials. Our Knife Gate Valve is full lined with high quality urethane, which far exceeds the wear-life of gum rubber and any other softer liner, or sleeve materials.
1.Zero leakage. Full lined urethane valve body and molded elastomer gate seal prevents leakage permanently both the valve sealing and the valve body itself during working.
2.Extended wear-life. High quality abrasive resistant urethane liners, and robust stainless knife gates as well as the unique design of the valve itself provide an extremely long service life.
3.Bi-directional shut-off. When back flow happens NSW can be used as a preventer as well.
4.Self-flushing design. During valve closing the beveled knife gate redirects flowing slurry towards the beveled urethane liner seat, develops turbulence and intensifies the flow then flushes the slurry out of the bottom of the urethane as the gate settles into the seat.
5.Convenient rebuilds. When finally rebuilds are necessary, the wear-parts (urethanes, gate seals, knife gates) can all be replaced in field. Valve bodies and other parts are reusable.
Options
1.Liners. Varieties of urethanes are available.
2.Gates. SS304 gates with hard chromium coated are standard. Other alloys are available (SS316, 410, 416, 17-4PH…) Optional gate coatings are also available.
3.PN10, PN16, PN25, 150LB, are available.
4.Optional actuators are available.
Product detail pictures:
Related Product Guide:
It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for ODM Dual Plate Wafer Check Valve Supplier – ANSI＆DIN Knife Gate Valve – Guangwo Valve , The product will supply to all over the world, such as: Libya, Hongkong, Nepal, As a well educated, innovative and energetic staff,we are responsible for all elements of the research, design, manufacturing, sales and distribution. With studying and developing new techniques,we are not only following but also leading the fashion industry. We listen attentively to the feedback from our customers and provide instant communication. You will instantly feel our expertise and attentive service.
By Jamie from Peru - 2018.06.30 17:29
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Isabel from Oman - 2018.02.04 14:13
Related products
-
ODM Pn40 Globe Valve Products – -196℃ ...
Applicable Standards Globe valve, BS1873 Steel valve, ASME B16.34 Face to face ASME B16.10 End Flanges ASME B16.5/ASME B16.47 Butt welding ends ASME B16.25 Inspection and test API 598S Material: SS Size Range: 2’’~24’’ Pressure Rating: ASME CL, 150,300,600,900,1500,2500 Temperature Range: -196°C~600°C Design Description - Outside Screw and Yoke - Bolted Bonnet and Pressure Seal - Rising stem and non-rising stem - Available with gear operator - Flange Ends and Buttwelding Ends - Different type...
-
OEM Best Api Y Type Strainer Supplier – ...
ANSI Y Strainer Applicable Standards Cast Y Strainer, ASME B16.34 Steel Valves,ASME B16.34 Face to face ASME B16.10 End Flanges ASME B16.5 Butt welded ends ASME B16.25 Inspection and test API 598 Material: cast steel, stainless steel, special alloy, CI, DI etc Size Range: 1/2″~16″ Pressure Rating: ASME CL,150, 300, 600 GW Cast Steel Y Strainer Y-type filter is used in water, oil and gas pipelines and various equipment. It mainly removes the medium in the pipe to protect the pressu...
-
ODM T Type Strainer Exporters – DIN Y S...
Short Description: Y strainer Key works: T, Y, BASKET, Strainer, A216 WCB, A351 CF8, CF8M , flange, 150lb, 300LB, 600LB, PRODUCT RANGE: Sizes: NPS 1/2 to NPS 48 Pressure Range: Class 150 to Class 2500 Flange Connection: RF, FF, RTJ, NPT, SW MATERIALS: Body Material: WCB, LCB, CF8, CF3，CF8M, CF3M, C5, WC6, WC9, W12, C95800, 4A, 5A, 6A Screen Material: SS304, SS316, SS316L, 4A, 5A, 6A, F51, Monel, Hastelloy STANDARD Design & manufacture ASME B16.34/EN 13709/JIS B2001 Face-to-face API 6D, A...
-
ODM T Type Strainer Exporters – Tempora...
Temporary Strainers are designed in cone ,basket,or plate shape. The temporary strainers are a effective mean for temporary straining for start-up applications.Fabricated temporary cone,basket,or plate strainers are designed for initial start-up and should not be used as a Permanent straining solution. The main characteristics of tapered temporary filter and the applicable scope Temporary filter/cone filter/cone bottom tip cone temporary filter/filter/flat conical filter/flat flat filter/stai...
-
OEM Best Api 600 Gate Valve Manufacturer –...
1.4408 DIN Gate Valve PN16 Applicable Standards Design EN 1984 Face to face EN 558-1 End Flanges EN 1092-1 Butt Welding ends EN 12627 Inspection and test EN 12266-1 Material: 1.4408 Size Range: DN32~DN1200 Pressure Rating: PN10~PN160 Temperature Range: -196°C~650°C Design Description - Outside Screw and York - Bolted Bonnet and Pressure Seal - Flexible wedge, fully guided - Seat in stellite or 13%Cr - Rising stem and non-rising stem - Available with gear operator - Flange Ends - Butt-weldin...
-
OEM Best Ansi Globe Valve Manufacturer – ...
Product Range Sizes: NPS 1/2 to NPS2 (DN15 to DN50) Pressure Range: Class 800, Class 150 to Class 2500 Materials Forged (A105, A350 LF2, A182 F5, F11, F22, A182 F304 (L), F316 (L), F347, F321, F51), Alloy 20, Monel, Inconel, Hastelloy Standard Design & manufacture API 602,ASME B16.34,BS 5352 Face-to-face MFG’S End Connection - Flange Ends to ASME B16.5 - Socket Weld Ends to ASME B16.11 - Butt Weld Ends to ASME B16.25 - Screwed Ends to ANSI/ASME B1.20.1 Test & inspect...