ANSI＆DIN Knife Gate Valve
ANSI＆DIN Knife Gate Valve
Applicable Standards
Knife Gate Valve, MSS SP-81
Steel Valves, ASME B16.34
Face to face MSS SP-81
End Flanges EN 1092-1/ASME B16.5/ASMEB16.47
Inspection and test MSS SP-81
Material: cast steel, stainless steel, special alloy, CI, DI etc
Size Range: DN50~DN1000
Pressure Rating: ASME CL, 150, PN10,PN16
Temperature Range: 0℃~120℃
MATERIALS:
Casting: (GGG40, GGG50, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2) Monel, Inconel, Hastelloy,UB6
Design Features:
Knife Gate Valve which makes it one of the best abrasive resistant materials. Our Knife Gate Valve is full lined with high quality urethane, which far exceeds the wear-life of gum rubber and any other softer liner, or sleeve materials.
1.Zero leakage. Full lined urethane valve body and molded elastomer gate seal prevents leakage permanently both the valve sealing and the valve body itself during working.
2.Extended wear-life. High quality abrasive resistant urethane liners, and robust stainless knife gates as well as the unique design of the valve itself provide an extremely long service life.
3.Bi-directional shut-off. When back flow happens NSW can be used as a preventer as well.
4.Self-flushing design. During valve closing the beveled knife gate redirects flowing slurry towards the beveled urethane liner seat, develops turbulence and intensifies the flow then flushes the slurry out of the bottom of the urethane as the gate settles into the seat.
5.Convenient rebuilds. When finally rebuilds are necessary, the wear-parts (urethanes, gate seals, knife gates) can all be replaced in field. Valve bodies and other parts are reusable.
Options
1.Liners. Varieties of urethanes are available.
2.Gates. SS304 gates with hard chromium coated are standard. Other alloys are available (SS316, 410, 416, 17-4PH…) Optional gate coatings are also available.
3.PN10, PN16, PN25, 150LB, are available.
4.Optional actuators are available.
Related products
-
API＆DIN Hand Knife Gate Valve
The opening and closing component of the knife gate valve is a door, and the direction of fluid movement perpendicular to the direction of the door, the knife gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. Mainly used in the field of paper, slurry, mining, ect. CNGW also supply the gate valves as below Pneumatic Knife Gate Valve Manual Slurry Valve Sprocket Knife Gate Valve Electric Knife Gate Valve Dark Rod Pneumatic Knife Gate Valve Conceal...
-
High-quality Pneumatic Knife Gate Valve
Forged steel swing check valve Forged steel check valve is to rely on the flow of the medium itself and automatically open and close the valve disc, used to prevent the reverse flow of medium, also known as check valve, one-way valve, reverse flow valve, and back pressure valve. Check valve is a kind of automatic valve. Its main function is to prevent the reverse flow of medium, reverse rotation of pump and drive motor, and discharge of container medium. The check va...
